Please read the leaflet enclosed for usage instructions
Do not heat in the microwave or in a water both Cleanse the waxed area using warm, soapy water, then rinse in clean water, before first use, apply and remove the wax to a small part of the area your wish to treat to ensure there is no adverse reaction. Do not apply the wax to spots, moles, mucous membranes, scars, cuts, eczema, irritated skin, sunburnt skin or to eyelashes. Not suitable for diabetics, the elderly or people suffering from circulatory disorders. Before waxing, the skin must be clean, dry and without traces of cream. Do not use on damp or hot skin. Do not use within 2 hours of taking a bath or shower, avoid contact with the eyes and mucous membranes. In the event of contact with the eyes or mucous membranes, rinse immediately and thoroughly. In the event of persistent irritation, seek medical advice. Keep out of the reach of children. Do not ingest.
Cleanse the area to be waxed using warm, soapy water, and dry well.
The area to be waxed must be dry and free of any traces of cream or cosmetic products.
Boil some water and pour into a glass
The water must not come into contact with the wax as it will makes it less effective. Screw the cap tightly onto the tube before placing it in the water.
Dry the tube well before removing the cap.
Steep the tube with cap tightly on top down, for 3 minutes, so the wax becomes runny.
Dry the tube well before removing the cap, then screw on the roll-on applicator. (Keep the cap to close the tube between waxing sessions).
Press the tube to start the wax flowing and roll the roll-on applicator on the back of the hand to test the temperature of the wax.
If the wax does not flow freely, place the cap back on the tube and place the tube in the hot water again for 1 minute.
Make sure the water does not come into contact with the wax as it will make it less effective.
1. Fine hair, upper lip hair, chin hair removal:
Roll the applicator on the area to be waxed, in the direction of hair growth.
Roll-on just once for a fine and even layer of wax.
Place a mini-strip over the wax layer leaving around 1 cm at the end for easy strip removal. Smooth on well to make it stick to the hair. Hold the skin taught with the other hand then remove the mini-strip in one go, back on itself against the direction of hair growth.
The mini-strips can be used several times until they no longer adhere to the wax.
2. Eyebrow hair removal:
For finer precision, the mini-strips can be cut to suit the shape of the eyebrows. Use the wooden spatula if necessary to separate the hair to be waxed.
The spatula can also be used to apply the wax onto very specific areas. Roll the applicator from the centre to the end of the eyebrow following the natural brow line.
Apply the mini-strip in the same ways as for hair removal on other areas.
Cleanse the waxed area using warm, soapy water, and then rinse it with clean water.
If you have some wax left for next time:
Unscrew the roll-on applicator and put the cap back on the tube.
The roll-on applicator and strips can be cleaned easily by soaking them for at least 10 minutes in hot, soapy water. Rub tem to remove any wax residue and then rinse them thoroughly with clean water. After rinsing, dry the roll-on applicator.
Colophonium, PEG-40 Hydrogenated Castor Oil, Triethanolamine, Parfum, Argania Spinosa Kernel Oil, Caprylic/Capric Triglyceride, Citrus Aurantium Amara Flower Extract, Butylphenyl,Methylpropional, Benzyl Salicylate, Citronellol, Hexyl Cinnamal, Limonene, Linalool
Your review has been processed and will need to be verified by a team member before going live.
Washable… easy and convenient to clean with warm, soapy water.
Efficient… removes the shortest of hairs (even 1-2mm).
Easy… Roll on with the unique applicator, for ultra fine precision and then simply wax off, for professional results at home.
Enriched… with Argan Oil and Orange Blossom Extract to leave delicate, dry and sensitive facial skin, moisturised, soft and smooth.